| |
 |
New revision of the HALCON GigEVision interface
|
|
|
(December 19, 2008) |
|
|
New revision 3.3 of the HALCON 8.0 GigEVision interface
which is now also available for Windows x64. Furthermore, it includes
several enhancements and bugfixes, e.g., regarding the broadcast
device discovery, multiple camera configurations, error handling,
automatic detection of packet size, and packet resending
(registered customers can download it here).
|
| |
|
HALCON 8.0 on new Sony XCI-SX100 and XCI-V100 smart
cameras
|
|
|
(November 27, 2008) |
|
|
First official release of the HALCON 8.0 SonyXCI-2 interface which
supports the new Sony XCI-SX100/C and XCI-V100/C smart cameras. Thus,
in combination with the standard HALCON installation for Windows x86,
HALCON now completely runs on the Sony XCI-SX100/C and XCI-V100/C
smart cameras, see also here
(registered customers can download it here).
|
| |
|
New revision of the HALCON LuCam interface
|
|
|
(November 27, 2008) |
|
|
New revision 2.4 / 3.4 of the HALCON 7.1 / 8.0 LuCam interface released
which accelerates the execution time of the GPIO parameters and
fixes a bug in the operator close_framegrabber. Furthermore, the
HALCON 8.0 revision now supports also Windows x64 Editions
(registered customers can download it here).
|
| |
|
New revision of the HALCON BaumerFCAM interface
|
|
|
(November 27, 2008) |
|
|
New revision 2.9 / 3.5 of the HALCON 7.1 / 8.0 BaumerFCAM interface released
which fixes a bug in external triggering in case of synchronous grabbing
(registered customers can download it here).
|
| |
|
First official release of the HALCON 8.0 interface for
PixeLINK cameras
|
|
|
(October 31, 2008) |
|
|
First official release of the HALCON 8.0 PixeLINK interface
which supports the IEEE 1394 (FireWire), USB, and GigE cameras from
PixeLINK
(registered customers can download it here).
|
| |
|
New revision of the HALCON GigEVision interface
|
|
|
(September 30, 2008) |
|
|
New revision 3.2 of the HALCON 8.0 GigEVision interface
which provides a new acquisition mode to enforce the grabbing of
latest available images, broadcast device discovery, new parameters for
IP configuration and block timeout, automatic checking for firewalls
on Windows XP, and support of real-time scheduling policy on Linux
systems. Furthermore, several bugs have been fixed
(registered customers can download it here).
|
| |
|
New revision of the HALCON 1394IIDC interface for Linux
|
|
|
(September 30, 2008) |
|
|
New revision 2.2 / 3.1 of the HALCON 7.1 / 8.0 1394IIDC interface for Linux released
which is now available also for Linux x86_64 and is based on new
versions of the underlying system libraries libraw1394 and libdc1394
(registered customers can download it here).
|
| |
|
New HALCON Embedded releases for eneo SC series and Strampe VisionBox
|
|
|
(August 22, 2008) |
|
|
New HALCON Embedded versions for eneo SC series (HALCON Embedded,
Version 7.1.4) and Strampe VisionBox (HALCON Embedded, Version 8.0.2) have
been released. To download them (registration required)
and to read their Installation Guidelines, go here.
|
| |
|
New revision of the HALCON LuCam interface
|
|
|
(August 19, 2008) |
|
|
New revision 2.3 / 3.3 of the HALCON 7.1 / 8.0 LuCam interface released
which provides new parameters to control the frame rate and to
query the actual sensor size.
(registered customers can download it here).
|
| |
|
New revisions of the HALCON dPict, INSPECTA, and INSPECTA5 interfaces
|
|
|
(August 19, 2008) |
|
|
New revision 2.2 / 3.2 of the HALCON 7.1 / 8.0 dPict interface,
new revision 2.12 / 3.3 of the HALCON 7.1 / 8.0 INSPECTA interface, and
new revision 2.2 / 3.3 of the HALCON 7.1 / 8.0 INSPECTA5 interface released
which support now auto-detection of actually available devices in
HDevelop
(registered customers can download it here).
|
| |
|
New version of FirePackage driver
|
|
|
(August 5, 2008) |
|
|
New version 2v29 of the FirePackage driver released. This
new version can be used in combination with the 1394IIDC interface and fixes most notably
the compatibility problem of the former versions 2v25...2v28
in case of multiple camera configurations
(registered customers can download both the interface as
well as the underlying driver here).
|
| |
|
New maintenance release 7.1.4 for
HALCON 7.1
|
|
|
(July 31, 2008) |
|
|
The newest maintenance release 7.1.4 of HALCON 7.1
includes several enhancements, such as significant speed-ups and general
improvements of many operators. Additionally, HALCON 7.1.4 delivers
several new examples for HDevelop, as well as documentation updates and
fixes of all currently known bugs. Have a look at the
release notes for a detailed description of HALCON 7.1.4. Registered customers can
download the new
release or a package to update an older release of HALCON 7.1.
|
| |
|
New revision of the HALCON GigEVision interface
|
|
|
(July 24, 2008) |
|
|
New revision 3.1 of the HALCON 8.0 GigEVision interface
which includes various extensions and improvements such as an advanced
packet resend mechanism, support of more pixel formats, dynamically setting
of transport layer-related parameters, automatic packet size optimization,
software cropping, and support of ForceIP. Furthermore, besides several
bug fixes, all parameter names have been made consistent to the GenICam
Standard Feature Naming Convention
(registered customers can download it here).
|
| |
|
First official release of the HALCON remote interface for eneo SC smart cameras
|
|
|
(July 24, 2008) |
|
|
First official release of the HALCON 7.1 / 8.0eneo interface
which allows the remote grabbing of images from a eneo SC smart camera
(registered customers can download it here).
|
| |
|
New revision of the HALCON VRmUsbCam interface
|
|
|
(July 24, 2008) |
|
|
New revision 3.1 of the HALCON 8.0 VRmUsbCam interface
which fixes a bug in the operator grab_image_start to avoid unnecessary
re-initializing of the acquisition engine
(registered customers can download it here).
|
| |
|
New revision of the HALCON pylon interface
|
|
|
(July 23, 2008) |
|
|
New revision 2.7 / 3.7 of the HALCON 7.1 / 8.0 pylon interface released
which fixes bugs in the operator open_framegrabber regarding the
device names and in handling multiple devices
(registered customers can download it here).
|
| |
|
New revision of the HALCON SaperaLT interface
|
|
|
(July 23, 2008) |
|
|
New revision 2.5 / 3.4 of the HALCON 7.1 / 8.0 SaperaLT interface released
which fixes a bug in the operators grab_image and grab_image_async
in case of an error
(registered customers can download it here).
|
| |
|
New revision of the HALCON BaumerFCAM interface
|
|
|
(June 05, 2008) |
|
|
New revision 2.8 / 3.4 of the HALCON 7.1 / 8.0 BaumerFCAM interface released
which fixes a bug regarding the interdependency of external triggering and
continuous grabbing mode and provides two new parameters
(registered customers can download it here).
|
| |
|
New revision of the HALCON pylon interface
|
|
|
(June 03, 2008) |
|
|
New revision 2.6 / 3.6 of the HALCON 7.1 / 8.0 pylon interface released
which now supports software cropping. Furthermore, the new interface
revision includes several minor bug fixes
(registered customers can download it here).
|
| |
|
New revision of the HALCON SaperaLT interface
|
|
|
(June 03, 2008) |
|
|
New revision 2.4 / 3.3 of the HALCON 7.1 / 8.0 SaperaLT interface released
which now supports Windows x64 Editions. Furthermore, the new interface
revision includes minor bug fixes
(registered customers can download it here).
|
| |
|
New maintenance release 8.0.2 for
HALCON 8.0
|
|
|
(April 29, 2008) |
|
|
The newest maintenance release 8.0.2 of HALCON 8.0
includes several enhancements, such as a much faster bar code reader with
more functionality and support for Composite codes that are attached to
RSS bar codes, and a universal interface to access all GigE Vision
compliant cameras. Additionally, HALCON 8.0.2 delivers GUI and usability
enhancements for HDevelop, such as a better parameter GUI for the Image
Acquisition Assistant and support for Italian, as well as documentation
updates and fixes of
all currently known bugs. Have a look at the release
notes for a detailed description of HALCON 8.0.2. Registered
customers can download the new
release or a package to update an older release of HALCON 8.0.
|
| |
|
First official release of the HALCON GigEVision interface
|
|
|
(April 29, 2008) |
|
|
First official release of the universal HALCON
GigEVision interface
which supports all GigE Vision compliant cameras. Note that this
new interface is based on an user-space implementation of the
GigE Vision protocol and is available for Windows x86 and Linux
(registered customers can download it here).
|
| |
|
First official release of the HALCON 8.0 interface for
VRmagic USB cameras
|
|
|
(April 29, 2008) |
|
|
First official release of the HALCON 8.0 VRmUsbCam interface
which supports the USB cameras from VRmagic
(registered customers can download it here).
|
| |
|
First official release of the HALCON 8.0 interface for
ABS UK1000/3000 cameras
|
|
|
(April 29, 2008) |
|
|
First official release of the HALCON 8.0 ABS interface
which supports the UK1000/3000 camera family from ABS
(registered customers can download it here).
|
| |
|
First official release of the HALCON 8.0 interface for
LinX GINGA digital-CL1e/CL2e/CL4e and GINGA++M1e/M4e boards
|
|
|
(April 29, 2008) |
|
|
First official release of the HALCON 8.0 LinX interface
which supports the new GINGA digital-CL1e/CL2e/CL4e and
GINGA++M1e/M4e boards from LinX
(registered customers can download it here).
|
| |
|
First official release of the HALCON 8.0 interface for
Silicon Software boards via VisualApplets
|
|
|
(April 29, 2008) |
|
|
First official release of the HALCON 8.0 mEnableVisualApplets interface
which supports the grabbing of user-defined preprocessed images from
Silicon Software microEnable boards via VisualApplets
(registered customers can download it here).
|
| |
|
Former
HALCON news:
see here
|
