|
|
|
Events, Shows, Fairs, and Seminars
 |
Belgium | |
China | |
Denmark | |
Finland | |
Germany | |||||
|
Israel | |
Japan | |
Netherlands | |
Poland | |
South Korea | |||||
|
Sweden | |
Taiwan | |
Thailand | |
Turkey | |
USA | |||||
|
Vietnam |
|
Belgium |
||
 |
Vision algorithms in HALCON | |
| (April 19, 2012) | ||
| held by our distributor Data Vision in Sint-Niklaas, Belgium | ||
|
3D Hardware 3D Software including HALCON | |
| (June 20, 2012) | ||
| held by our distributor Data Vision in Sint-Niklaas, Belgium | ||
|
China |
||
|
Vision China - Shanghai 2012 | |
| (March 20 - 22, 2012) | ||
|
Shanghai New International Exhibition Centre, Beijing, see MVTec products at the booth
of our distributor China Daheng Group, Inc. and hear the speech on Tuesday about 'Powerful machine vision software increases success" held by Dr. Olaf Munkelt, Managing Director of MVTec Software GmbH |
||
|
Denmark |
||
|
Automatik 2012 | |
| (September 11 - 13, 2012) | ||
| see MVTec products at the booth of our distributor Parameter AB in Brondbyhallen, Kopenhavn | ||
|
Finland |
||
|
Tekniikka 2012 | |
| (October 10 - 12, 2012) | ||
| Jyvaeskylaen Paviljonki, see MVTec products at booth B-456 of our distributor Parameter AB in Jyvaeskylaen, Finland | ||
|
Germany |
||
|
HALCON Grundlagen Seminar | |
| (February 14 - 15, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Grundlagen Seminar | |
| (March 13 - 14, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Methoden Seminar | |
| (March 27 - 28, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HANNOVER MESSE (HMI) 2012 | |
| (April 23 - 27, 2012) | ||
| Hannover, Messegelände, MVTec exhibits in hall 17 at booth #D01. | ||
|
HALCON Grundlagen Seminar | |
| (April 24 - 25, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Methoden Seminar | |
| (May 22 - 23, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
AUTOMATICA 2012 | |
| (May 22 - 25, 2012) | ||
| New Munich Trade Fair Center, MVTec exhibits in hall B2 at booth #204 | ||
|
HALCON Grundlagen Seminar | |
| (June 12 - 13, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Grundlagen Seminar | |
| (July 03 - 04, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Methoden Seminar | |
| (July 17 - 18, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Grundlagen Seminar | |
| (September 18 - 19, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Methoden Seminar | |
| (October 09 - 10, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Grundlagen Seminar | |
| (October 16 - 17, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
VISION 2012 | |
| (November 6 - 8, 2012) | ||
| Stuttgart Messegelände, MVTec exhibits together with IDS | ||
|
HALCON Grundlagen Seminar | |
| (November 13 - 14, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Methoden Seminar | |
| (November 20 - 21, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
HALCON Grundlagen Seminar | |
| (December 04 - 05, 2012) | ||
| held by our distributor IDS in Obersulm, Germany | ||
|
Israel |
||
|
IMVC 2012 - 3D lecture | |
| (February 09, 2012) | ||
| Avenue Conference Center, Airport City, Dr. Wolfgang Eckstein, managing director of MVTec Software GmbH, will give a speech on "3D Vision in Practical Application.' | ||
|
IMVC 2012 - Israel Machine Vision Conference & Exhibition | |
| (February 09, 2012) | ||
| Avenue Conference Center, Airport City, see MVTec products at the booth of our distributor OpteamX Ltd. | ||
|
New-Tech Exhibition 2012 | |
| (May 22 - 23, 2012) | ||
| Israel Trade Fairs Center, Tel Aviv, see MVTec products at booth 92 of our distributor OpteamX Ltd. | ||
|
Japan |
||
|
HALCON Training Course | |
| (February 07, 2012) | ||
| Introduction to HALCON, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (February 21, 2012) | ||
| Introduction to HALCON, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (February 22, 2012) | ||
| HALCON Basic, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (February 23, 2012) | ||
| HALCON Advanced Training, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (March 13, 2012) | ||
| Introduction to HALCON, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (March 14, 2012) | ||
| HALCON Basic, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (March 15, 2012) | ||
| HALCON Advanced Training, held by our distributor LinX Corporation in Yokohama | ||
|
HALCON Training Course | |
| (March 27, 2012) | ||
| Introduction to HALCON, held by our distributor LinX Corporation in Yokohama | ||
|
Netherlands |
||
|
Vision algorithms in HALCON | |
| (April 17, 2012) | ||
| held by our distributor Data Vision in Apeldoorn, Netherlands | ||
|
Vision algorithms in HALCON | |
| (April 18, 2012) | ||
| held by our distributor Data Vision in Eindhoven, Netherlands | ||
|
Vision & Robotics 2012 | |
| (June 05 - 06, 2012) | ||
| NH Conference Centre Koningshof te Veldhoven, see MVTec products at booth 117 of our distributor Data Vision | ||
|
3D Hardware 3D Software including HALCON | |
| (June 19, 2012) | ||
| held by our distributor Data Vision in Apeldoorn, Netherlands | ||
|
Practical Introduction HALCON I + II | |
| (October 09 - 10, 2012) | ||
| held by our distributor Data Vision in Vlaardingen, Netherlands in English | ||
|
3D Introduction in HALCON software | |
| (October 11, 2012) | ||
| held by our distributor Data Vision in Apeldoorn, Netherlands in English | ||
|
Poland |
||
|
AUTOMATICON | |
| (March 20 - 23, 2012) | ||
| at Warsaw International Expocenter see MVTec products at the booth of our distributor Parameter AB in Warsaw, Poland | ||
|
South Korea |
||
|
HALCON 10 Introduction and Basic Training | |
| (February 21 - 22, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (Calibration, Measurement, 3D) | |
| (February 23, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (March 27 - 28, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (2D/3D Matching) | |
| (March 29, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (April 24 - 25, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (OCR, 1D/2D Barcode) | |
| (April 26, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (May 29 - 30, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (Blob, Color, Filter) | |
| (May 31, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (June 26 - 27, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (Calibration, Measurement, 3D) | |
| (June 28, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (July 24 - 25, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (2D/3D Matching) | |
| (July 26, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (August 28 - 29, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (OCR, 1D/2D Barcode) | |
| (August 30, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (September 25 - 26, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (Blob, Color, Filter) | |
| (September 27, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (October 23 - 24, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (Calibration, Measurement, 3D) | |
| (October 25, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (November 27 - 28, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (2D/3D Matching) | |
| (November 29, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON 10 Introduction and Basic Training | |
| (December 18 - 19, 2012) | ||
| training days offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
HALCON Training Course (OCR, 1D/2D Barcode) | |
| (December 20, 2012) | ||
| training course offered by our distributor Teknix Co., Ltd. at 246-1, Yangjae-Dong, Seocho-Ku, Seoul 137-130 "on request" | ||
|
Sweden |
||
|
Elmia Automation | |
| (May 08 - 11, 2012) | ||
| in Joenkoeping , see MVTec products at booth D04:60 of our distributor Parameter AB | ||
|
Scanautomatic & Processteknik | |
| (October 09 - 11, 2012) | ||
| at the Swedish Exhibition Center Gothenburg, see MVTec products at booth D07:21 of our distributor Parameter AB | ||
|
Taiwan |
||
|
HALCON Seminar in Kaohsiung | |
| (March 22, 2012) | ||
| held by our distributor Photon-Tech Instruments Co., Ltd. in No.261, Nanmen Rd., West Central District, Tainan City 700, Taiwan (R.O.C.) | ||
|
HALCON Seminar in Taipei | |
| (March 23, 2012) | ||
| held by our distributor Photon-Tech Instruments Co., Ltd. in No.261, Nanmen Rd., West Central District, Tainan City 700, Taiwan (R.O.C.) | ||
|
OPTO Taiwan 2012 - The 21th International Optoelectronics Exposition | |
| (June 19 - 21, 2012) | ||
| Taipei World Trade Center Nangang Exhibition Hall, see MVTec products at the booth of our distributor Photon-Tech Instruments Co., Ltd. | ||
|
Thailand |
||
|
Assembly Technology 2012 | |
| (June 21 - 24, 2012) | ||
| BITEC, Bangkok, see MVTec products at the booth of our distributor SOLIMAC AUTOMATION | ||
|
METALEX 2012 | |
| (November 21 - 24, 2012) | ||
| BITEC, Bangkok, see MVTec products at the booth of our distributor SOLIMAC AUTOMATION | ||
|
Turkey |
||
|
WIN 2012 Part 2, Otomasyon (Automation) Fair | |
| (March 29 - April 01, 2012) | ||
|
TUYAP Fair Convention and Congress Centre, Beylikduzu, Istanbul
see MVTec products in Hall 2 at booth C-220 of MAVIS Machine Vision Software Ltd. |
||
|
USA |
||
|
The Vision Show 2012 | |
| (May 08 - 10, 2012 ) | ||
| John B. Hynes Veteran's Memorial Convention Center in Boston, Massachusetts, MVTec LLC exhibits in Hall A at booth no.301 | ||
|
Vietnam |
||
|
METALEX Vietnam 2012 | |
| (October 04 - 06, 2012) | ||
| Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City, see MVTec products at the booth of our distributor SOLIMAC AUTOMATION | ||
|
||
|
Former Events: see here | |
